
PRODUCT : ECF BLEACHED EUCALYPTUS KRAFT PULP | |||
GENERAL CHARACTERISTICS OF SHEETS, BALES AND UNITS | |||
SHEETS TYPICAL GRAMMAGE, g o. d./m2 |
1200 – 1250 | ||
AVERAGE DIMENSIONS, cm x cm | 85 x 70 |
BALES
|
TYPICAL GROSS WEIGHT, kg |
250 |
| COMMERCIAL WEIGHT, kg | Depending on dryness |
| AVERAGE BASE DIMENSIONS, cm x cm | 86 x 71 |
| AVERAGE HEIGHT, cm | 44 |
| WRAPPERS Material |
CELBI PP pulp |
| Typical dryness, % | 90 |
| Number of plies per bale | 2 |
| WIRES Diameter, mm |
2,18 |
| Number of wires per bale | 3 |
UNITS
|
NUMBER OF BALES |
8 |
| TYPICAL GROSS WEIGHT, ton | 2,0 |
| AVERAGE BASE DIMENSIONS, cm x cm | 142 x 86 |
| AVERAGE HEIGHT, cm | 176 |
| NUMBER OF WIRES PER UNIT | 7 |
| DIAMETER OF WIRES, mm | 3,0 |
| TENSILE STRENGTH OF WIRES, N/mm2 | 1050 |
PRODUCT : ECF BLEACHED EUCALYPTUS KRAFT PULP
GENERAL PROPERTIES
PARAMETER | UNIT | METHOD | TYPICAL VALUES |
Dirtiness | mm2/kg | Celbi C-43 | < 3 |
Brightness (Lab Sheet) | % ISO | ISO 3688 / ISO 2470-1 | 90,5 |
pH of cold aqueous extract | – | ISO 6588-1 | 6,0 |
Spec. conductivity of aqueous extract | mS/m | ISO 6587 | 3,0 |
Acetone extract | % | ISO 14453 | 0,09 |
Ash | % | ISO 1762 | 0,30 |
Total chlorine content | mg Cl/kg o.d. | SCAN-CM 51 | < 220 |
AOX removable by washing | mg Cl/kg o.d. | SCAN-CM 44 | < 10 |
PAPERMAKING PHYSICAL PROPERTIES
PARAMETER | UNIT | METHOD No PFI rev. ¢ | TYPICAL VALUES | ||
0 | 1500 | 2500 | |||
Drainability | ºSR | ISO 5267-1 | 22 | 33 | 43 |
Density | kg/m3 | ISO 534 | 570 | 685 | 730 |
Bulk | cm3/g | ISO 534 | 1,75 | 1,46 | 1,37 |
Tensile index | N.m/g | ISO1924-2 | 28 | 68 | 81 |
Tensile stiff. index | kN.m/g | ISO 1924-2 | 4,3 | 6,8 | 7,5 |
Burst index | kN/g | ISO 2758 | 1,30 | 4,30 | 5,50 |
Tear index | mN.m2/g | ISO 1974 | 3,70 | 8,50 | 8,70 |
Light scatter. coeff. | m2/kg | ISO 9416 | 40 | 31 | 28 |
Opacity | % | ISO 2471 | 77,0 | 71,5 | 69,5 |
Air resist. (Gurley) | s | ISO 5636-5 | 1,2 | 8,0 | 30 |
TESTING METHODS:
- Laboratory PFI beating : ISO 5264-2 – Preparation of lab sheets : ISO 5269-1
- Conditioning of paper test pieces : 23 °C, 50% RH (ISO 187)
- Testing of lab sheets : ISO 5270
___________________________________________________________________________________
The above data are typical of normal production, but should not be interpreted as internal or binding specifications.






pluswe.org ®/™ Trademarks of International trade-Master, Inc. worldwide ©IMWW or its affiliates, The PlusWe is a trademark of IMWW

All names, logos and trademarks are the property of International trade-Master, Inc. worldwide © IMWW 2013. All Rights Reserved.
Visit to this site and use of the information hereon is subject to our Privacy Policy. This webpage contains links to web sites maintained by parties not associated with International trade-Master, Inc. International trade-Master, Inc. provides these third-party links for your convenience and information and not to suggest that the sponsors of these sites are affiliated with International trade-Master, Inc. in any way. International trade-Master, Inc. does not have control over the content of these sites and they have their own terms and conditions of use and data collection and privacy policies. You agree that your access and use of these sites is subject to the terms, conditions and policies applicable to each site and you are solely responsible for complying with them.